Configure Utstar UT -330R2U ( Type-1) modem for BSNL broadband

Method to configure ADSL modem Utstar UT 330R2RU type 1 Modem (One Eternet and one USB port).

PPPoE Mode (Always ON mode)

• Connect the router to PC through Ethernet cable.
• Open the browser and type the url http://192.168.1.1.
• Type user name admin and password admin in login window.
• On left panel click on ‘WAN’ and configure the PVC0.
• Verify that VPI/VCI value as 0 / 35, Select PPPoE/PPPoA under WAN settings.
• Enter the username ( i.e. user@dataone) and password ( provided by BSNL) and select the connection type as PPPoE LLC.
• Verify that Authentication is set to PAP, Obtain DNS automatically, Default route and NAT parameters are Enabled and click on Apply.

• On top menu click on Tools and select Misc (on left panel). Click on Save & Reboot.

Bridge Mode

• Connect the router to PC through Ethernet cable.
• Open the browser and type the url http://192.168.1.1.
• Type user name admin and password admin in login window.
• On left panel click on ‘WAN’ and configure the PVC0.
• Verify that VPI/VCI value as 0 / 35, Select Bridge mode under Wan settings and save.
• On top menu click on Tools and select Misc (on left panel). Click on Save & Reboot.
• Make a PPPoE dialer in your operating system.

Making PPPoE dialer in windows XP for bridge mode

• Control panel > Network connections
• Click on create a new connection(left top) or click file then new connection click next
• Select connect to the internet and click next
• Select setup connection manually and click next
• Select connect using a broadband connection that requires a user name and password and click next
• Give ISP name BSNL and click next
• Enter user name password and confirm password  assigned by BSNL and click next
• Select add a shortcut and click finish
• This will create a dialer icon on the desktop.The user can connect/disconnect broadband using the same icon.